Home/Services

Complete Fabrication Capabilities

Our Engineering & Fabrication Services

From heavy industrial structures and automated rolling shutters to residential gates, custom window grills, and commercial vehicle chassis fabrication across Kharagpur and Midnapore.

Service 01

Rolling Shutters

Manual, automatic, motorized, and remote-controlled rolling shutters for shops, commercial units, garages, and industrial warehouses across Kharagpur and Midnapore.

Key Specifications

Material: High-tensile CR / Galvanized Steel / Aluminium Slats (0.8mm to 1.6mm gauge)
Motor Capacity: 300kg to 1500kg load capacity with thermal overload protection
Operation: Remote control (433MHz), manual push-pull, or side gear with chain pulley backup

Remote Control Rolling Shutters
Automatic & Motorized Shutters
Perforated & Grill Rolling Shutters
Commercial Shopfront Shutters
Heavy-Duty Industrial Rolling Shutters
Residential & Garage Rolling Shutters

Dedicated Page View Photos

Service 02

Sliding Gates

Custom motorized and manual sliding gates engineered with heavy-duty track rollers, rack-and-pinion automation, and aesthetic modern steel finishes.

Key Specifications

Framework: 50x50mm to 100x100mm heavy structural MS hollow sections
Track System: V-groove / U-groove heavy-duty EN8 machined steel rollers with double bearings
Drive System: Oil-bath gear motor with hardened steel rack and pinion

Automatic Motorized Sliding Gates
Residential Modern Sliding Gates
Heavy-Duty Industrial Sliding Gates
Telescopic & Cantilever Sliding Gates
Wrought Iron & Laser-Cut Designer Sliding Gates
Trackless & Top-Hung Sliding Gates

Dedicated Page View Photos

Service 03

Swing Gates

Motorized and manual double/single leaf steel swing gates designed for strength, elegance, and reliable security for residential and commercial properties.

Key Specifications

Hinges: Heavy-duty machined grease-pin ball bearing hinges with high weight capacity
Automation: Linear screw-driven or articulated arm electromechanical actuators (24V/230V)
Safety: Auto-stop safety sensors and integrated manual emergency release key

Automated Dual-Arm Motorized Swing Gates
Heavy MS Double Leaf Entrance Gates
Wrought Iron Ornamental Swing Gates
Single Leaf Pedestrian & Security Gates
Stainless Steel (SS 304) Swing Gates
Gate Automation Retrofitting for Existing Gates

Dedicated Page View Photos

Service 04

Industrial Gates

Engineered heavy-duty industrial gates for manufacturing facilities, warehouses, freight depots, and industrial estates requiring high-durability perimeter security.

Key Specifications

Structural Steel: IS 2062 Grade E250 / E350 heavy hollow boxes, I-beams and channel sections
Motor Rating: 1000kg to 4000kg continuous-duty industrial automation units
Protection: Hot-dip galvanized or epoxy zinc-rich primer with aliphatic polyurethane finish

Heavy Factory Sliding Gates (up to 40+ feet clear opening)
Cantilever Trackless Industrial Gates
Telescopic Multi-Leaf Sliding Gates
High-Security Crash-Resistant Steel Gates
Industrial Bi-Folding Speed Gates
Industrial Warehouse Sliding Doors

Dedicated Page View Photos

Service 05

Iron & Steel Fabrication

Comprehensive structural mild steel (MS) and stainless steel (SS) fabrication, beams, columns, frames, staircases, and custom metal engineering.

Key Specifications

Materials: Prime ISI-certified MS angles, channels, beams (ISMB), plates, and hollow sections
Welding Standard: Shielded Metal Arc (SMAW/ARC) and GMAW (MIG) conforming to IS 816 / AWS D1.1
Testing: Visual weld inspection, dimensional validation, and load deflection compliance

Structural Steel Fabrication (Columns, Trusses, Beams)
MS (Mild Steel) & SS (Stainless Steel) Fabrication
Industrial Machinery Frames & Mounting Skids
Spiral & Straight Steel Staircases & Catwalks
Pipe Racks, Conveyor Supports & Platforms
Architectural Metalwork & Custom Brackets

Dedicated Page View Photos

Service 06

Aluminium Work

Premium architectural aluminium fabrication including sliding windows, casement doors, office partition cabins, toughened glass fittings, and ACP panel cladding.

Key Specifications

Section Thickness: 1.2mm to 2.0mm Jindal / Hindalco certified architectural grade aluminium
Finish: Anodized (15-25 microns) or Polyester Powder Coating (50-70 microns) in custom shades
Glass: 5mm to 12mm clear float, tinted, frosted, or Saint-Gobain toughened safety glass

Sliding Aluminium Windows (2-Track, 3-Track with Mosquito Mesh)
Aluminium Casement & Hinged Doors
Office Partition Systems & Glass Cabins
ACP (Aluminium Composite Panel) Exterior Cladding
Toughened Glass Office Fronts & Patch Fittings
Louvered Aluminium Ventilators & False Ceilings

Dedicated Page View Photos

Service 07

Roof Sheds & Steel Structures

Complete design, fabrication, and erection of industrial roof sheds, warehouse sheds, factory PEB structures, car parking canopies, and polycarbonate roofing.

Key Specifications

Truss & Purlin: Heavy IS 4923 / IS 1239 hollow steel tubes and C/Z cold-formed purlins
Roofing Sheets: 0.45mm to 0.60mm high-tensile 550 MPa Galvalume (AZ150) color-coated profile sheets
Fasteners: Class 3 / Class 4 corrosion-resistant self-drilling screws with EPDM washers

Industrial Factory Roof Sheds
Warehouse & Godown Steel Roofing
Pre-Engineered Building (PEB) Structural Frameworks
Commercial & Residential Car Parking Sheds
Polycarbonate & Skylight Sheet Roofing
Color-Coated PPGI / Galvalume Profile Sheet Installation

Dedicated Page View Photos

Service 08

Grill Manufacturing

Safety and decorative iron grills, window grills, balcony railings, boundary wall spikes, and custom steel architectural barriers fabricated to exact site dimensions.

Key Specifications

Material: Prime 10mm/12mm/16mm solid square MS bars, flats, and forged elements
Welding: Full seam welding on all joints to eliminate moisture entry and rust formation
Coating: Anti-corrosive red oxide / zinc phosphate primer with high-gloss synthetic enamel

Modern Window Safety Grills (Solid Square / Round Bar)
Balcony Railings & Safety Enclosures
Staircase Railings (MS & Stainless Steel SS 304)
Boundary Wall Top Security Grills & Spikes
Laser-Cut CNC Designer Decorative Grills
Air Conditioner Outdoor Unit Protective Cages

Dedicated Page View Photos

Service 09

Gate Manufacturing

Full spectrum gate manufacturing including main entrance gates, ornamental wrought iron gates, modern composite gates, and automated security barriers.

Key Specifications

Framework: 14/16 gauge heavy structural steel box sections with internal cross-bracing
Locking: Heavy-duty internal drop bolts, latch assemblies, and smart lock compatibility

Main Entrance Boundary Gates
Modern Minimalist Box-Pipe Gates
Wrought Iron Traditional Royal Gates
WPC (Wood Plastic Composite) & Steel Combination Gates
Bi-Folding Space-Saver Gates
Motorized & Automated Entrance Gates

Dedicated Page View Photos

Service 10

Welding Services

Certified manual arc (SMAW), MIG (GMAW), TIG (GTAW), and on-site repair welding services for structural steel, machinery parts, and industrial fabrications.

Key Specifications

Electrodes: Approved AWS E6013, E7018 low-hydrogen electrodes and ER70S-6 MIG wire
Capacity: Capable of welding plates and sections from 1.0mm up to 50mm+ thickness

Shielded Metal Arc Welding (SMAW / Stick Welding)
MIG / CO2 Welding (GMAW) for High-Strength Clean Joints
TIG Welding (GTAW) for Stainless Steel & Aluminium
On-Site Structural Welding & Emergency Repair
Heavy Machinery Crack Repair & Hardfacing
Pipe & Pressure Vessel Structural Welding

Dedicated Page View Photos

Service 11

Custom Engineering

Bespoke metal engineering, prototype development, precision steel forming, machinery modifications, and specialized fabrication based on client drawings.

Key Specifications

Engineering Tolerance: Precision cutting, punching, bending, and drilling within ±1.0mm
Material Versatility: Mild Steel (MS), Stainless Steel (SS 304/316), and Aluminium Alloys

Custom Industrial Equipment Skids & Baseframes
Material Handling Trolleys, Pallets & Storage Racks
Custom Architectural Metal Features & Sculptures
Industrial Hopper, Chute & Duct Fabrication
Machine Safety Enclosures & Guarding
Special Purpose Structural Assemblies

Dedicated Page View Photos

Service 12

Repairing & Servicing

Comprehensive maintenance, structural repair, motor servicing, shutter spring replacement, gate realignment, and commercial vehicle body servicing.

Key Specifications

Spares: Genuine high-grade replacement springs, motors, gears, bearings, and rollers
Turnaround: Emergency breakdown service within hours across Kharagpur

Rolling Shutter Motor & Spring Replacement
Sliding Gate Track Realignment & Bearing Replacement
Commercial Vehicle Body & Chassis Crack Repair
Hinge, Latch & Hardware Replacement
Anti-Rust Treatment & Re-Painting Services
Preventive Annual Maintenance Contracts (AMC)

Dedicated Page View Photos

Service 13

3 & 4 Wheeler Commercial Vehicle Chassis Fabrication

Specialized manufacturing, reinforcement, and modification of chassis and cargo bodies for 3-wheeler and 4-wheeler commercial vehicles, mini-trucks, and pickups.

Key Specifications

Steel Grade: High-yield structural automotive channels and reinforced tubular cross-members
Welding: Continuous deep-penetration CO2/MIG welding for dynamic road vibration resistance
Corrosion Protection: Heavy multi-coat anti-rust primer and durable automotive finish

3-Wheeler Auto & Cargo Vehicle Chassis Fabrication
4-Wheeler Mini-Truck & Pickup Body Building (Tata Ace, Bolero Maxi Truck, Jeeto)
Chassis Extension, Lengthening & Reinforcement
Heavy MS Cargo Box Body & Cabin Fabrication
Tipper, Container Body & Tanker Support Structures
Vehicle Underbody Anti-Rust Coating & Cross-Member Welds

Dedicated Page View Photos

Need a Custom Engineering Brief?

We take on specialized architectural metalwork, prototype fabrications, and bespoke industrial assemblies.

Get Free Quote